AMP60XL
60W AMPLIFIER
AMP Proel amplifiers series have been designed for mixing and microphone announcement diffusion in PA applications.
Main features
• Protection circuit for the speakers against overload and short circuit
• Led Power indicator
• Led level indicator
• Main volume control
• Separate volume control for inputs from 1 to 5
• Low and high tone control
• Ground connection screw
• Four mic/line microphone with XLR (Phantom24V)
• Three AUX inputs rear switchable
• Main in/out function
• Four outputs amongst which one at 4 ohm constant impedance and the other three at constant voltage (25/50/100V)
• TAPE OUT output on RCA
• Power switch selector 230V/117Vca
• 24Vdc emergency power supply
• Supplied by Proel with brackets for rack mounting purposes - Brackets code: 95RMAMPV
• Microphone input with priority function and apt to receive microphone stand BM100 and BMGONG chime
Datasheet
Output power RMS / MAX : 60/90W
Inputs : 4x MIC/LINE balanced
1x AUX (CD/TAPE/TUNER selectable)
Input Sensitivity : MIC: 2mV / 600 ohm (with 24V phantom)
LINE: 100mV / 100 Kohm
AUX: 150mV / 10 Kohm
Signal Output : TAPE OUT
Output Levels : TAPE OUT: 300mV / 4.7 Kohm
Controls : 1 MASTER VOLUME CONTROL
4 MIC/LINE VOLUME CONTROLS
1 AUX VOLUME CONTROL
1 TREBLE TONES CONTROL
1 BASS TONES CONTROL
Loudspeakers outputs : 100/70/50V - 4 ohm
Frequency response : 50Hz - 18KHz (-3dB)
Distortion (THD) : < 1% (@ Pnom 1KHz)
S/N Ratio : > 80dB
Power Supply : 230/117Vac – 50/60Hz
24 Vdc for Emergency
Operating temperature : 0 - 40ºC
Input/Output Connectors : MIC/LINE: 4x XLR
AUX: 1x RCA L/R
TAPE OUT: 1x RCA L/R
OTHERS IN/OUT: screw terminals
Dimensions (W x H x D) : 420 x 88 x 280mm - 2 rack unities 19''
Weight : 7.8 kg(17.199lb )
Nici un produs